Title

Home
Articles Search
steering rack

Articles search results for steering rack

Showing 1 to 13 of 13 articles

Time to arrange all those agonised over, carefully selected and applied suspension components to give of their best.

Suspension - Basic set-up method

part numbers: TOOL10, TOOL11, HILO, HILO-01

Time to arrange all those agonised over, carefully selected and applied suspension components to give of their best.

This is one of those subjects viewed as a ‘black art’, largely because of lack of understanding and confusion. The confusion part is because folk encompass the whole suspension set-up deal with suspension arrangement and design, lack of understanding instilling terror at the thought of ‘fiddling’ with the suspension components. The latter also fuelled by the knowledge that expensive specialist measuring equipment is needed. Well, there is no black art – you can work the magic. More a case of a long day...

SUSPENSION - Terminology

Glossary of terms used in the suspension on the mini. The Mini has consistently more than proven its capability in competition with very limited and cost-effective modifications based on the standard equipment fitted. Having first ensured the bodyshell (in reality little more than a complex bracket to hold suspension and driver securely in place) is well sorted out by removing all cruddy or rotten metalwork and into something like straight, square and strong we, maximising suspension stability and geometry pays dividends in the enjoyment that is driving a Mini. Understanding what the individual ingredients are helps in pursuing what you want from the experience. Smooth Mover Good, reliable, and consistent handling is dependent on a number of factors. At this stage, we’re concerned with clapped out or badly adjusted suspension components. Stiff, seized, partially seized or slack, sloppy, worn out suspension components will cause inconsistent, wayward, confusing and – more important

SUSPENSION - Basic Priorities

Suspension - Basic priorities for improved suspension performance. Having studied the 'Suspension - Terminology' article you should now have a ‘job description’ understanding of previously possibly un-comprehended words associated with suspension control. Now - what to do with it? The first thing we need to establish is an order of priority before distributing hard-earned 'beer vouchers' in all directions. Fortunately, this is a good deal less complicated than is generally believed. Despite the five main factors that control the front suspension geometry – kingpin inclination, caster angle, camber angle, track, and bump-steer – we are only really able to alter three of those easily. King-pin inclination is non-adjustable, as it’s a feature of where the swivel-pins are mounted on the hub at the factory. It will alter as other adjustments are made, but we can do nothing easily about correcting/optimising it independently, as these are fixed in position on the swivel hub.

What you actually need for the disc/drum conversion is pretty straightforward. Disconnect the steering arms, top and bottom swivel-pins, CV joint, and flexible brake pipes at the subframe - that’s it. There are, however, a number of ancillaries to consider.

Basics

Basics Fitting discs designed for the Mini is easy enough. Just make sure you use CV gaiters for the disc-brake set-up - these have a different bellows shape to stop the gaiter rubbing the inside of the hub. The drum type will rub, then split, shedding grease all over the place. Moly grease is mighty mucky stuff to deal with and doesn't assist braking at all! A tip for racers - to stop the gaiters over-expanding when getting very hot and imitating the aforementioned, put either a decent sized split pin or (my favorite) a piece of very small bore pipe - as in the type supplied with WD40 aerosols, etc. - under the retaining strap on the drive shaft. This allows air to escape and return,

Predominantly 13-inchers, but 12s as well, the main thrust of the questions being 'what do I need to do?'

This subject is a regular visitor to the message board and 'Knowledge' section of Mini Magazine for whom I write - fitting bigger wheels. Predominantly 13-inchers, but 12s as well, the main thrust of the questions being 'what do I need to do?' along with 'which wheel arch extensions will I need?' The answer has always been somewhat 'clipped' purely because of the space availability issues both in the magazine and on the message board, so something a little more detailed was required. Although the Mini suspension was designed around the use of 10-inch wheels with cross-ply tyres, a quick dash through history reveals that fitment of these bigger wheel sizes isn't a recent, 'modern' application.

This bracket is designed to adjust the rake/height of the steering column and wheel. Incorrect fitment will cause premature wear and damage to steering column and rack, so the following MUST be adhered to.

1. Remove column to mounting bracket shear bolt. If the bolt head has actually been sheared off, this is easily accomplished using a small centre or pin punch, working around the edge of the...

Fitment of the Ultimate Drivetrain Kit is as Cooper ‘S’ Drivetrain assembly except for the following points:-

1 When fitting driveshaft to CV joint it is always advisable to Tig weld CV joint inner race to thick circlip in two places.
2 When installing large alloy side covers please ensure a flat and spring washer are used in conjunction with 5/16 unc x 11/4” bolts, so as bolts do not bottom out in gearbox casing
3 When connecting Hardy Spicer joints to output shafts using 3/8 unf bolts, a small amount of grinding will be needed on one of the bolt flats to enable location and locking on to output shafts.
4 Before sliding driveshaft into Hardy Spicer coupling ensure splines of both are thoroughly oiled and greased.
5 Centralise steering rack and set up steering geometry
6 After installation of kit remove suspension units and CV joint nuts and move suspension through full bump (ie up) and rebound (ie down) and check that in both p...

Spa-Francorchamps the best race track in the world?

Well there are many Formula 1 driver who would agree and in my humble opinion, it is certainly true. Brands Hatch GP circuit, Suzuka in Japan and Dijon in France come close for me...

The come down after the Spa weekend was abrupt and for a week I felt little enthusiasm to even determine what had to be done, let alone start doing it! Fortunately my mood lightened, and with a week to go before the Silverstone Championship round I got down to it. Well, to be honest I took the car down to Altered Images on the Sunday afternoon, and Peter Vickers cast his diagnostic eye over the car. The front...

Mini Production dates

We have tried to get together as complete list as possible to show all the models made from 1985 onwards, hopefully this will help identify those cars that have been modified over the years. If you have any information that you know is correct or anything that you think is not right please let us know.

Steady Eddy My first visit to Mini Spares must have been over 12 years ago and while buying the usual go faster bits, I enquired about a Saturday job. A very lean and handsome Keith Calver could only offer me full time employment. I declined and subsequently have spent a small fortune over the years and drunk far too many pints of beer with K.C.

It was decided to build the 1978/79 British touring car championship winning Richard Longman 1275GT. The original car still exists remaining just as Richard stepped out of it in 79 and would be sacrilege to rebuild the car to modern...

Articles search results for steering rack

Contact Mini Spares

Store Details:

Classic Mini Brochure & Manuals